[Q21-Q43] Try NCP-5.15 Free Now! Real Exam Question Answers Updated [Sep 23, 2022]

Share

Try NCP-5.15 Free Now! Real Exam Question Answers Updated [Sep 23, 2022]

Get Ready to Pass the NCP-5.15 exam with Nutanix Latest Practice Exam 


Who should take the Nutanix NCP-5.15 Exam

A badge of honour, Nutanix Professional Certifications are intended to recognise the expertise and experience you have learned to successfully launch, operate, leverage and scale the Business Cloud. Gaining these certifications validates your demonstrated expertise and ability to lead your business in the next step of your Corporate Cloud journey. This exam is for those prefessionals having a backgound on cloud-computing.

  • Cloud-Computing professional

 

NEW QUESTION 21
An administrator responsible for a VDl environment needs to investigate reports of slow logins. The administrator finds that increasing the number of vCPUs from 2 to 4 will reduce the login times. Production workloads are consuming 75% of the host CPU on the cluster. The administrator increases the vCPU count on all of the VDl VMs.
What are two impacts on the cluster? (Choose two)

  • A. Increase CPU utilization%
  • B. Increasing CPU counts will decrease memory utilization
  • C. Increase CPU ready%
  • D. Increase memory utilization%

Answer: B

 

NEW QUESTION 22
which cli is used to run this command? (cluster version)

  • A. ecli
  • B. ncli
  • C. bash shell
  • D. acli

Answer: B

 

NEW QUESTION 23
In which two scenarios is an automated live migration likely to occur? (Choose two)

  • A. Network upgrade
  • B. Hypervisor upgrade
  • C. Cluster resource hotspot
  • D. AOS upgrade

Answer: B,C

 

NEW QUESTION 24
the analysis dashboard allows you to create which 2 type of charts? (Choose two)

  • A. out-of-band management
  • B. metric (IOPS, sequential reads, etc).
  • C. open support cases
  • D. entity (vm,host,disk,memory,etc.)

Answer: B,D

 

NEW QUESTION 25
An Administrator is working on a one-node ROBO cluster configurations
Which statement is true for this configuration?

  • A. Supported hardware is NX-1175-G5 and G6
  • B. Witness vm required to break cluster quoram
  • C. witness vm should be 8vcp and 20gb ram
  • D. the minimum RPO 8 hours required

Answer: A

Explanation:
Reference:
https://www.nutanix.com/blog/unlocking-the-roboedge-it-landscape-with-the-launch-of-nutanix-1-node-cluster

 

NEW QUESTION 26
An administrator needs to ensure that resource are reserved so that all VMs are able to restart in the event of a host failure.
Which steps should the administrator take to ensure the cluster is configured and operating appropriately?

  • A. On a Nutanix CVM, execute the command ncli cluster get-domain fault-tolerance-status type=node
  • B. Under the gear icon, select Manage VM high Availability and check Enable HA Reservation
  • C. In the Prism Hardware Desktop, select each host and confirm that RF is set to 3 under Host details.
  • D. Under the gear Icon, select Degraded Node Setting and confirm that no hosts are degraded.

Answer: B

 

NEW QUESTION 27
An administrator is managing a highly active SQL workload that is writing I/Os in 2 MB chunks to a vDisk.
The administrator wants to optimize capacity setting for the computer.
Which storage optimization technology should the administration select to meet these requirement?

  • A. Capacity Deduplication
  • B. Cache Deduplication
  • C. Compression
  • D. Erasure Coding

Answer: C

 

NEW QUESTION 28
What is the function of the virbr0 bridge on AHV?

  • A. To carry storage communication between the guest VMs and the CVM
  • B. To carry management and storage communication between user VMs and the CVM.
  • C. To carry all traffic between the user VMs and the upstream network.
  • D. To carry management and storage communication between user VMs and AHV host.

Answer: D

Explanation:
Explanation
http://www.vstellar.com/2019/01/10/ahv-networking-part-1
-basics/#:~:text=AHV%20Network%20Architecture&text=virbr0%20is%20an%20internal%20switch,virbr0)%2

 

NEW QUESTION 29
When configuring Prism Central, which two log modules are able to forward messages to an external syslog server? (Choose two.

  • A. DNS
  • B. Flow
  • C. NTP Synchronization
  • D. API Audit

Answer: B,D

 

NEW QUESTION 30
CPU utilization climbs above 90% on several VMs. This causes performance degradation for a business-critical application.
How can alerts be configured to notify the administrator before VM CPU utilization hits 90%?

  • A. On the Health dashboard, locate the VM CPU Check and lower the alert threshold below 90%.
  • B. On a CVM, configure a cron job to run the VM CPU Check more frequently and email the result.
  • C. On a CVM, use ncli to set the VM CPU Check threshold for the critical VMs to a value below 90%.
  • D. On the Alerts dashboard, ensure that the VM CPU usage alert is not set to auto-resolve.

Answer: D

 

NEW QUESTION 31
How should an administrator make sure that the LCM Framework is always up to date and upgraded to the latest version?

  • A. From the Life Cycle Management Perform Inventory every morning
  • B. From the Life Cycle Management page in Prism Element, click Perform Inventory, then edit settings and click the Enable LCM Auto Inventory checkbox
  • C. From the Life Cycle Management page in Prism Element, click Perform Inventory, then edit settings and set LCM Auto Inventory to Daily
  • D. From the Life Cycle Management page in Prism Central, click Perform Inventory, then edit settings and click the Enable LCM Auto Inventory checkbox

Answer: A

 

NEW QUESTION 32
A cluster is configured for RF2. The data resiliency status field in Prism is Critical.
What is the state of the cluster?

  • A. A drive has failed and successfully re-replicated the missing data.
  • B. A drive has failed and the node is critically close to failure.
  • C. A drive has failed and is currently re-replicating the missing data.
  • D. A drive has failed and the node needs to be rebooted.

Answer: C

 

NEW QUESTION 33
An administrator wants to use Volumes to connect to physical servers that are not able to be virtualized.
Which three things must be configured for Volumes to support iSCSI clients? (Choose three)

  • A. iSCSI Multipathing I/O
  • B. Enable external client access
  • C. Client OS iSCSI initiator
  • D. Data Services IP address
  • E. Cluster Virtual IP address

Answer: C,D,E

Explanation:
Explanation
https://portal.nutanix.com/page/documents/details/?targetId=Web-Console-Guide-Prism-v51:wc-block-services-

 

NEW QUESTION 34
What action should an administrator take to verify the ability to receive email alerts from a Nutanix cluster?

  • A. Click the configuration for SNMP and add a destination.
  • B. Add an email address to the alert configuration list.
  • C. Click the test button on the SMTP configuration.
  • D. Pull the first SSD out of the node.

Answer: A

 

NEW QUESTION 35
A VM in a 12-node Nutanix cluster is hosting an application that has specific Physical GPU requirements.
Only three nodes in the cluster meet this requirement.
The administrator wants to allow a general workload to be distributed across all nodes in the cluster and must make sure that the node hosting the VM meets its requirements.
How should the administrator perform this task?

  • A. Configure VM-Host affinity for the nodes that meet the application's GPU requirement.
  • B. Create a sperate three-node cluster using the nodes that meet the requirement.
  • C. Over-Provision the application VM with additional virtual GPUs.
  • D. Configure anti-affinity rules between the application VM and the other VMs running on the cluster.

Answer: A

 

NEW QUESTION 36
Async DR is configured between two sites. A network outage occurs at the primary site.
Which steps must the administrator perform to bring the VMs back into service at the backup site?
Item instructions: For each procedure, indicate the order in which that procedure must take place to meet the item requirements. Not all procedures are valid. Identify any invalid procedures using the drop-down option.

Answer:

Explanation:

Explanation

 

NEW QUESTION 37
In respective to 1 GbE and 10 GbE interfaces (physical host), which statements are true?

  • A. If you want to use the 10 GbE interfaces for guest VM traffic, make sure that the guest VMs do not use the VLAN over which the Controller VM and hypervisor communicate.
  • B. Do not include the 1 GbE interlaces in the same bond as the 10 GbE interlaces. Also, to avoid loops, do not add the 1 GbE interlaces to bridge brO, either individually or in a second bond. Use them on other bridges.
  • C. If you want to use the 1 GbE interfaces for guest VM connectivity, follow the hypervisor manulacturer's switch '- port and networking configuration guidelines.

Answer: A,B

 

NEW QUESTION 38
An administrator needs to view and compare IOPs for VMs across multiple clusters.
Which two dashboards can the administrator use to find this information? (Choose two)

  • A. Home
  • B. Explore
  • C. Planning
  • D. Apps
  • E. Analysis

Answer: A,E

 

NEW QUESTION 39
Which algorithm do snapshots and clones leverage to maximize efficiency and effectiveness?

  • A. Split-mirror
  • B. Continuous Data Protection
  • C. Copy-on-Write
  • D. Redirect-On-Write

Answer: D

 

NEW QUESTION 40
How should an administrator make sure that the LCM Framework is always up to date and upgraded to the latest version?

  • A. From the Life Cycle Management page in Prism Element, click Perform Inventory, then edit settings and click the Enable LCM Auto Inventory checkbox
  • B. From the Life Cycle Management page in Prism Element, click Perform Inventory, then edit settings and set LCM Auto Inventory to Daily
  • C. From the Life Cycle Management page in Prism Central, click Perform Inventory, then edit settings and click the Enable LCM Auto Inventory checkbox
  • D. From the Life Cycle Management page in Prism Central, click Perform Inventory every morning

Answer: D

Explanation:
Reference: https://next.nutanix.com/how-it-works-22/nutanix-upgrade-order-37917

 

NEW QUESTION 41
what applies to prism central?

  • A. created during foundation
  • B. created bu user as 1 or 3-VM
  • C. clusters and PC need to match hypervisor
  • D. setup through prism as 1,2 or 3-VMs

Answer: B

 

NEW QUESTION 42
Which two methods are valid for migrating a VM from a Nutanix vSphere cluster to AHV? (Choose two.)

  • A. Nutanix Move
  • B. Cross-Hypervisor DR
  • C. Live Migration
  • D. Storage vMotion

Answer: A,B

 

NEW QUESTION 43
......

Pass Your Next NCP-5.15 Certification Exam Easily & Hassle Free: https://actualtests.test4engine.com/NCP-5.15-real-exam-questions.html