100% Free Real Updated JN0-611 Questions & Answers Pass Your Exam Easily
Easily To Pass New JN0-611 Verified & Correct Answers
Earning the Juniper JN0-611 (Cloud, Professional (JNCIP-Cloud)) Certification can be a significant achievement for IT professionals looking to advance their careers. It can demonstrate to employers that they have the skills and knowledge needed to design, implement, and manage complex cloud solutions using Juniper Networks technology. Certified professionals can also join the Juniper Networks Certification Program community, which provides access to exclusive resources, training, and events. Overall, the JN0-611 exam is an excellent opportunity for IT professionals to validate their expertise in cloud networking and virtualization and enhance their professional credentials.
NEW QUESTION # 25
Which statement is correct about service chaining?
- A. All hosts must be in the same network subnet.
- B. Service chaining is always Layer 2 based.
- C. The right service interface is always the ingress for traffic.
- D. All traffic entering the left interface must exit the right interface.
Answer: C
NEW QUESTION # 26
What is a core component of an AWS cloud environment?
- A. a resource group
- B. a VNET
- C. a VPC
- D. a vRouter
Answer: A
NEW QUESTION # 27
Your orchestrator has deployed three virtual machines on the compute nodes and deployed a VNF as shown in the exhibit. You request that a service chain be established so that traffic from VM-1 to VM- 2 is steered through VNF-1. Because of a connectivity problem, you must now verify that the necessary routes are present in the routing tables on the required nodes.
In this scenario, which nodes should you inspect?
- A. H-1 and H-2 compute nodes only
- B. the spine and leaf nodes only
- C. H-1, H-2, H-3 compute nodes only
- D. H-1, H-2, H-3, H-4 compute nodes only
Answer: D
NEW QUESTION # 28
Referring to the exhibit. You successfully run the Ansible playbook shown in the exhibit. However, you are unable to see the instances you created.
What is the problem in this scenario?
- A. Your s3 bucket was not accessible during the deployment.
- B. You are viewing the wrong region.
- C. You are viewing the correct region in the wrong VPC.
- D. You have incorrectly entered your key information.
Answer: D
NEW QUESTION # 29
Referring to the exhibit, which statement is true about virtual networks A and B so that the vSRX can be used as a service instance in a transparent service chain?
- A. Virtual networks A and B must be running on different host servers.
- B. Virtual networks A and B must be running on the same host server.
- C. Virtual networks A and B must have the same CIDR addressing.
- D. Virtual networks A and B must have different CIDR addressing.
Answer: D
NEW QUESTION # 30
An administrator has created a deployment and exposed the front-end Python service. The Python service is not available.
Referring to the exhibit, what is the problem?
- A. A Kubemetes network policy must be added to permit the traffic.
- B. The LoadBalancer objects require a load balancer appliance.
- C. A floating IP pool in Contrail must be associated with the service's namespace to allocate external IPs.
- D. Contrail SNAT overlay forwarding must be enabled.
Answer: C
NEW QUESTION # 31
You are configuring the management and control_data interfaces in a standard switch port group using ContrailVM. In the scenario, which two statements are correct? {Choose two.)
- A. The control_data interface can have the DHCP flag set as false.
- B. The management interface can have the DHCP flag set as false.
- C. The management interface must have the DHCP flag set as true.
- D. The control_data interface must have the DHCP flag set as true.
Answer: C,D
NEW QUESTION # 32
Which two statements are correct when deploying or integrating OpenShift with Contrail Enterprise Multicloud? {Choose two.)
- A. NTP is installed automatically and synchronized.
- B. When using a load balancer, manually copy the htpasswd file into all of the master nodes.
- C. NFS for OpenShift logging is recommended.
- D. Contrail Command for deployment is not supported.
Answer: A,C
NEW QUESTION # 33
An OpenShift cluster operator wants to verify the health of the cluster network infrastructure. In this scenario, which method should the operator use to accomplish this task?
- A. Issue the contrail-status command on the infrastructure node.
- B. Issue the contrail-status command on the master node.
- C. Issue the oc get pods -n contrail-system command on the master node.
- D. Issue the oc get daemonset -n contrail-system command on the master node.
Answer: D
NEW QUESTION # 34
You are using Kubernetes in your Contrail Enterprise Multicloud environment. You must create an isolated Kubernetes namespace. In this scenario, which two statements are correct? (Choose two.)
- A. A network policy is automatically created.
- B. A networking port is automatically created.
- C. A pod network is automatically created.
- D. A project is automatically created.
Answer: A,B
NEW QUESTION # 35
You are deploying resources within Microsoft Azure integrated with Contrail. Which set of components must be defined in this scenario?
- A. region, VNET, security groups, EC2 instance details
- B. region, resource group, VNET, security groups, instance details
- C. region, resource group, VPC, security groups, instance details
- D. region, VPC, security groups, EC2 instance details
Answer: D
NEW QUESTION # 36
You are writing Contrail firewall rule policies for a recently added application on an AWS cloud environment. The application is complex and requires access to a list of s3 databases along with various protocol and port combinations.
In this scenario, which two policy rule constructs would ensure that the number of rules are limited without affecting functionality? (Choose two.)
- A. service groups
- B. application policy sets
- C. address groups
- D. global tags
Answer: C,D
NEW QUESTION # 37
Referring to the exhibit, which role is the router device performing when implementing a PNF service chain?
- A. customer gateway
- B. virtual private gateway
- C. multicloud gateway
- D. service control gateway
Answer: A
NEW QUESTION # 38
Your company uses Kubernetes as an orchestrator integrated with Contrail. You are asked to create the networks shown in the exhibit and enable communication between Pod 1 and Pod 2.
Which three steps must be performed in this scenario? (Choose three.)
- A. Apply a created network policy.
- B. Assign IP addresses to the pods.
- C. Update permissions in the security group. Create Namespace A and Namespace B.
- D. Create VN-A and VN-B.
Answer: A,B,D
NEW QUESTION # 39
Users mention that an application has network connectivity issues orchestrated by Kubernetes.
To troubleshoot the issue, you must obtain the IP addresses of the pods used by the application.
In this scenario, which command will accomplish this task?
- A. kubect1 describe pods
- B. kubect1 get services
- C. kubect1 explain pods
- D. kubect1 config view
Answer: D
NEW QUESTION # 40
Service instance SI2 is performing source NAT using Ihe pool of addresses shown in the exhibit.
You are verifying connectivity by sending ICMP traffic from the G1 host to the R1 host. You notice that the ICMP requests are received on R1, but the ICMP responses are not received on the G1 host.
In this scenario, what would solve this problem?
- A. You must add a static route table to SI2.
- B. You must add static routes to the VMs in the Left VN.
- C. You must add static routes to the VMs in the Right VN.
- D. Apply a network policy to allow traffic from the Left VN toward the Right VN.
Answer: D
NEW QUESTION # 41
You are using Contrail Command to configure AWS. You are unable to ping your VMs within the instance you created.
Referring to the exhibit, what is the problem?
- A. Your subnets are in different availability zones.
- B. You must change the direction of the "Allow-all-inbound" rule to "Ingress".
- C. Your subnets for "Availability zone 1" and "Availability zone 2" must be the same.
- D. You must change the protocols allowed in the "Allow-all-inbound" rule to "ANY".
Answer: B
NEW QUESTION # 42
Which statement correctly characterizes the VLAN allocation for tenant VMs when Contrail provides overlay network virtualization in a VMware cluster?
- A. On every ESXi host, each VM has a unique VLAN.
- B. All VMs on the same subnet on a single ESXi host share a common VLAN.
- C. Each virtual network has a unique VLAN on every ESXi host.
- D. All VMs on a single ESXi host have the same unique VLAN.
Answer: B
NEW QUESTION # 43
Kubernetes Service maps to which object in Contrail?
- A. the native load balancer implemented using vRouter
- B. the namespace-based service proxy
- C. the HAProxy-based load balancer
- D. the Contrail service appliance-based load balancer
Answer: D
NEW QUESTION # 44
Your company has integrated Contrail with its VMware installation. In this scenario, which two steps are needed to create a virtual network and launch a virtual machine? (Choose two.)
- A. Create a virtual network using Contrail Command.
- B. Create a virtual machine using the vCenter Ul.
- C. Create a virtual machine using Contrail Command.
- D. Create a virtual network using the Contrail Classic Ul.
Answer: C,D
NEW QUESTION # 45
Which statement is correct about OpenShift?
- A. OpenShift can orchestrate VMware pods.
- B. OpenShift can orchestrate Kubernetes pods.
- C. OpenShift can orchestrate OpenStack pods.
- D. OpenShift can orchestrate NSX pods.
Answer: C
NEW QUESTION # 46
Referring to the exhibit, what is the correct order of workflow to delete the vSRX?
- A. Delete the policy, delete the instance, and then delete the template.
- B. Delete the template, delete the instance, and then delete the policy.
- C. Shutdown and delete the instance from the Horizon user interface.
- D. Delete the instance, delete the policy, and then delete the template.
Answer: C
NEW QUESTION # 47
You are considering different designs for your Contrail Enterprise Multicloud installation. Several designs have been submitted.
Referring to the exhibit, which design model does this represent?
- A. bridged overlay
- B. routed overlay using EVPN Type 6 routes
- C. centrally-routed bridging overlay
- D. edge-routed bridging overlay
Answer: A
NEW QUESTION # 48
Which Contrail daemon set is responsible for listening to the Kubernetes API messages and creating resources in the Contrail API database?
- A. contrail-analytics-alarm
- B. contrail-configdb
- C. contrail-Jcube-manager
- D. contrail-controller-config
Answer: D
NEW QUESTION # 49
......
The JN0-611 exam consists of multiple-choice and scenario-based questions that assess a candidate's ability to design and implement Juniper Networks cloud networking technologies. It covers topics such as virtualization, configuration and management of cloud networks, automation and orchestration, and troubleshooting common issues in cloud networking environments.
The Juniper JN0-611 certification exam is designed for professionals looking to validate their skills in cloud networking. This exam is a part of the Juniper Networks Certification Program (JNCP) and is meant for individuals who have expertise in designing, implementing, and managing cloud networking solutions.
Free JN0-611 Exam Files Downloaded Instantly: https://actualtests.test4engine.com/JN0-611-real-exam-questions.html