Latest Success Metrics For Actual 300-715 Exam 2026 Realistic Dumps
Updated 300-715 Dumps Questions For Cisco Exam
Passing the Cisco 300-715 exam is a crucial step towards achieving the CCNP Security certification. Implementing and Configuring Cisco Identity Services Engine certification validates the candidate's skills in the implementation and management of security solutions using Cisco technology. Candidates who pass the exam are also able to demonstrate their expertise in the deployment of Cisco ISE in a variety of environments.
A valuable & challenging Cisco exam that leads to two different Cisco certifications is test 300-715 SISE or Executing & Configuring Cisco Identity Services Engine.
NEW QUESTION # 180
Which port does Cisco ISE use for native supplicant provisioning of a Windows laptop?
- A. TCP 8909
- B. TCP 443
- C. CUDP 1812
- D. TCP 8905
Answer: D
Explanation:
https://community.cisco.com/t5/network-access-control/port-8905-and-or-8909/td-p/3499402
NEW QUESTION # 181
Which two roles are taken on by the administration person within a Cisco ISE distributed environment?
(Choose two.)
- A. backup
- B. active
- C. secondary
- D. standby
- E. primary
Answer: C,E
NEW QUESTION # 182
An administrator must deploy the Cisco Secure Client posture agent to employee endpoints that access a wireless network by using URL redirection in Cisco ISE. The compliance module must be downloaded from Cisco and uploaded to the Cisco ISE client provisioning resource. What must be used to upload the compliance module?
- A. Client Provisioning Portal
- B. Secure Client posture profile
- C. Secure Client configuration
- D. agent resources from the local disk
Answer: A
NEW QUESTION # 183
A network administrator is configuring a new access switch to use with Cisco ISE for network access control. There is a need to use a centralized server for the reauthentication timers. What must be configured in order to accomplish this task?
- A. Configure Cisco ISE to block access after a certain period of time.
- B. Configure Cisco ISE to replace the switch configuration with new timers.
- C. Issue the authentication timer reauthenticate server command on the switch.
- D. Issue the authentication periodic command on the switch.
Answer: C
NEW QUESTION # 184
An engineer is configuring posture assessment for their network access control and needs to use an agent that supports using service conditions as conditions for the assessment. The agent should be run as a background process to avoid user interruption but when it is run. the user can see it. What is the problem?
- A. The posture module was deployed using the headend instead of installing it with SCCM
- B. The user was in need of remediation so the agent appeared m the notifications
- C. The proper permissions were no! given to the temporal agent to conduct the assessment
- D. The engineer is using the "Anyconnect" posture agent but should be using the "Stealth Anyconnect posture agent
Answer: D
NEW QUESTION # 185
An engineer is configuring posture assessment for their network access control and needs to use an agent that supports using service conditions as conditions for the assessment. The agent should be run as a background process to avoid user interruption but when it is run, the user can see it. What is the problem?
- A. The posture module was deployed using the headend instead of installing it with SCCM
- B. The user was in need of remediation so the agent appeared m the notifications
- C. The proper permissions were not given to the temporal agent to conduct the assessment
- D. The engineer is using the "Anyconnect" posture agent but should be using the "Stealth Anyconnect posture agent
Answer: D
NEW QUESTION # 186
Refer to the exhibit.
Which two configurations are needed on a catalyst switch for it to be added as a network access device in a Cisco ISE that is being used for 802 1X authentications? (Choose two )
- A. Option E
- B. Option A
- C. Option C
- D. Option B
- E. Option D
Answer: B,C
NEW QUESTION # 187
How is policy services node redundancy achieved in a deployment?
- A. by creating a node group
- B. by utilizing RADIUS server list on the NAD
- C. by deploying both primary and secondary node
- D. by enabling VIP
Answer: C
Explanation:
Explanation
https://www.cisco.com/c/en/us/td/docs/security/ise/2-4/admin_guide/Workflow/b_deployment_2_4.html
NEW QUESTION # 188
When creating a policy within Cisco ISE for network access control, the administrator wants to allow different access restrictions based upon the wireless SSID to which the device is connecting. Which policy condition must be used in order to accomplish this?
- A. DEVICE Device Type CONTAINS <SSID Name>
- B. Airespace Airespace-Wlan-ld CONTAINS <SSID Name>
- C. Radius Called-Station-ID CONTAINS <SSID Name>
- D. Network Access NetworkDeviceName CONTAINS <SSID Name>
Answer: C
Explanation:
Explanation
https://www.cisco.com/c/en/us/support/docs/security/identity-services-engine/115734-ise-policies-ssid-00.ht
NEW QUESTION # 189
Drag the steps to configure a Cisco ISE node as a primary administration node from the left into the correct order on the night.
Answer:
Explanation:
Explanation
https://www.cisco.com/c/en/us/td/docs/security/ise/2-4/admin_guide/b_ise_admin_guide_24/b_ise_admin_guide Step 1 Choose Administration > System The Register button will be disabled initially. To enable this button, you must configure a Primary PAN.
Step 2
Check the check box next to the current node, and click
Step 3
Click Make Primary to configure your Primary PAN.
Step 4
Enter data on the General Settings tab.
Step 5
Click Save to save the node configuration.
NEW QUESTION # 190
A Cisco ISE administrator must restrict specific endpoints from accessing the network while in closed mode.
The requirement is to have Cisco ISE centrally store the endpoints to restrict access from. What must be done to accomplish this task''
- A. Add each MAC address manually to a blocklist identity group and create a policy denying access
- B. Add each IP address to a policy denying access.
- C. Create a logical profile for each device's profile policy and block that via authorization policies.
- D. Create a profiling policy for each endpoint with the cdpCacheDeviceld attribute.
Answer: C
NEW QUESTION # 191 
Refer to the exhibit. In which scenario does this switch configuration apply?
- A. when passing IP phone authentication
- B. when preventing users with hypervisor
- C. when allowing multiple IP phones to be connected
- D. when allowing a hub with multiple clients connected
Answer: D
Explanation:
https://www.linkedin.com/pulse/mac-authentication-bypass-priyanka-kumari#:~:text=Multi%
2Dauthentication%20host%20mode%3A%20You,allows%20multiple%20source%20MAC%20addresses.
NEW QUESTION # 192
An engineer is working with a distributed deployment of Cisco ISE and needs to configure various network probes to collect a set of attributes from the used to accomplish this task?
- A. primary policy administrator
- B. monitoring
- C. pxGrid
- D. policy service
Answer: B
NEW QUESTION # 193
An administrator is trying to collect metadata information about the traffic going across the network to gam added visibility into the hosts. This Information will be used to create profiling policies for devices us mg Cisco ISE so that network access policies can be used What must be done to accomplish this task?
- A. Configure the DHCP probe within Cisco ISE
- B. Configure SNMP to be used with the Cisco ISE appliance
- C. Configure the RADIUS profiling probe within Cisco ISE
- D. Configure NetFlow to be sent to me Cisco ISE appliance.
Answer: A
NEW QUESTION # 194
A network engineer must configure a centralized Cisco ISE solution for wireless guest access with users in different time zones. The guest account activation time must be independent of the user time zone, and the guest account must be enabled automatically when the user self-registers on the guest portal. Which option in the time profile settings must be selected to meet the requirement?
- A. Select FromCreation from the Account Type dropdown.
- B. Set the Duration field to 24:00:00.
- C. Set the Maximum Account Duration to 1 Day.
- D. Select FromFirstLogin from the Account Type dropdown.
Answer: A
NEW QUESTION # 195
Drag the Cisco ISE node types from the left onto the appropriate purposes on the right.
Answer:
Explanation:
Monitoring = provides advanced monitoring and troubleshooting tools that you can use to effectively manage your network and resources Policy Service = provides network access, posture, guest access, client provisioning, and profiling services. This persona evaluates the policies and makes all the decisions.
Administration = manages all system-related configuration and configurations that relate to functionality such as authentication, authorization, auditing, and so on pxGrid = shares context-sensitive information from Cisco ISE to subscribers
https://www.cisco.com/c/en/us/td/docs/security/ise/1-4/admin_guide/b_ise_admin_guide_14/b_ise_admin_guide_14_chapter_011.html#ID57
NEW QUESTION # 196
An administrator is configuring cisco ISE lo authenticate users logging into network devices using TACACS+ The administrator is not seeing any of the authentication in the TACACS+ live logs. Which action ensures the users are able to log into the network devices?
- A. Enable the device administration service in the PSN persona.
- B. Enable the device administration service in the Administration persona
- C. Enable the service sessions in the PSN persona.
- D. Enable the session services in the administration persona
Answer: B
NEW QUESTION # 197
There are several devices on a network that are considered critical and need to be placed into the ISE database and a policy used for them. The organization does not want to use profiling. What must be done to accomplish this goal?
- A. Enter the IP address in the correct Endpoint Identity Group.
- B. Enter the MAC address in the correct Logical Profile.
- C. Enter the MAC address in the correct Endpoint Identity Group.
- D. Enter the IP address in the correct Logical Profile.
Answer: A
NEW QUESTION # 198
......
Cisco 300-715 exam is aimed at network professionals who have a good understanding of network security concepts and technologies. 300-715 exam covers a wide range of topics, including the deployment of ISE nodes, network access devices, user and device authentication, device profiling, policy enforcement, and endpoint compliance.
Full 300-715 Practice Test and 301 Unique Questions, Get it Now!: https://actualtests.test4engine.com/300-715-real-exam-questions.html